High Pressure Clamp - 1½"

1½-Inch Bolted Tri-Clamp

This nominal 1½-inch clamp is a bolted Tri-Clamp connection component. Published specifications list a 304 stainless steel clamp and bolt, a brass nut, a 3/8-inch–16 bolt thread, and a 5/8-inch wrench size for the nut.

Match the clamp to the actual ferrule geometry, connection size, and suitable gasket. A nominal size alone does not establish compatibility with every tube or fitting.

The current description does not establish a numerical pressure limit, installation torque, temperature limit, or universal leak-free performance. Confirm manufacturer specifications for the clamp and all mating components before service.

Inspect the clamp, bolt, nut, ferrules, and gasket before assembly. Follow the applicable installation procedure and do not disconnect an assembly while it is pressurized.

Related Products

27 Inch Lab Stand for Laboratories. A laboratory stand is a separate support option, not a mating fitting for this Tri-Clamp.

Frequently Asked Questions

What connection and material are listed?
This nominal 1½-inch bolted Tri-Clamp uses 304 stainless steel for the clamp and bolt, with a brass nut.

What hardware details are published?
The bolt is listed as 3/8-inch–16, with a matching nut and 5/8-inch wrench size. Confirm the supplied hardware and assembly requirements.

Is a maximum pressure rating documented?
A numerical pressure rating is not established in the current description. Confirm the clamp, ferrules, gasket, and complete assembly ratings before service.