27 Inch Lab Stand for Laboratories

The 27 Inch Lab Stand is a laboratory support stand for compatible clamps, rings, holders, glassware, and other apparatus. Its published configuration includes a plate-style base and an approximately 27-inch vertical threaded rod, providing an elevated support point for assemblies that need adjustable positioning above a work surface.

A 27 Inch Lab Stand can be used to build compatible filtration, heating, stirring, distillation, and general laboratory support arrangements. The exact clamp, boss head, ring, or holder should be selected according to the size and weight of the equipment being supported. Thread and rod dimensions should be verified when combining components from different manufacturers.

Position the 27 Inch Lab Stand on a stable, level work surface and arrange attached equipment so the combined center of gravity remains safely over the base. A stand does not eliminate tipping risk, especially when heavy glassware, long horizontal clamps, tubing, or elevated equipment shifts weight away from the center of the base. Additional support may be appropriate for larger assemblies.

Inspect the base, rod, threads, fasteners, and attached clamps before use. Tighten support hardware sufficiently to prevent unintended movement without overtightening against glass components. Keep the stand away from conditions that exceed the materials' documented temperature or chemical compatibility, and clean spills promptly using an appropriate method.

Choose the 27 Inch Lab Stand for compatible laboratory assemblies requiring a tall vertical support rod and plate base. Browse matching clamps, boss heads, lab jacks, and related hardware in our Lab Stands and Lab Jacks collection.

Frequently Asked Questions

What does the lab stand include?

The published configuration includes a plate-style base and an approximately 27-inch vertical threaded rod.

Will every laboratory clamp fit this stand?

Not necessarily. Verify rod, thread, and mounting dimensions when combining components from different manufacturers.

How should the stand be positioned?

Place it on a stable, level surface and keep the combined center of gravity over the base. Use additional support when the assembly requires it.

Related Laboratory Support

Pair the stand with a three-finger laboratory clamp where dimensions and load requirements are compatible. Check the mounting fit before assembling your setup.