Flexible Silicone Vacuum Hose 1/4" ID

Flexible Silicone Vacuum Hose – 1/4 Inch ID is tubing intended for compatible laboratory and general vacuum-system connections. The 1/4-inch internal diameter provides the primary sizing reference when matching the hose to barbs, adapters, pumps, traps, or other equipment.

Silicone tubing is flexible and can be routed around equipment more easily than rigid tubing, but actual suitability depends on the specific vacuum level, temperature, chemicals or vapors present, wall thickness, fittings, and system configuration. Confirm dimensions and compatibility before installation.

When using this 1/4-inch ID vacuum hose, avoid sharp bends, crushing, excessive stretching, and unsupported routing that could restrict flow or cause the tubing to pull away from a fitting. Secure connections appropriately for the intended setup and inspect the hose before each use for cuts, cracking, softening, swelling, discoloration, or other deterioration.

The current product information does not document a maximum vacuum rating, pressure rating, operating-temperature range, wall thickness, chemical-resistance chart, or food/medical certification. Do not assume compatibility with solvents, corrosive vapors, fuels, oxygen service, or other hazardous materials without supporting documentation.

Vacuum systems can create implosion and exposure hazards. Use vacuum-rated equipment, appropriate shielding, ventilation, and PPE for the complete apparatus. This flexible silicone vacuum hose is sold as a connection component; users are responsible for determining suitability for their specific system.